Reolink Doorbell Mount – Tilted 25 Degrees Left And 10 Or 20 Degrees Down 3D Printer Model
The file 'Reolink Doorbell Mount – Tilted 25 Degrees Left And 10 Or 20 Degrees Down 3D Printer Model' is (STL) file type, size is 390.5KB.
The file 'Reolink Doorbell Mount – Tilted 25 Degrees Left And 10 Or 20 Degrees Down 3D Printer Model' is (STL) file type, size is 390.5KB.
This is a wedged wall mount for a Reolink PoE or Wifi doorbell tilted leftwards at 25 degrees and either 10 degrees downwards or 20 degrees downwards.
The original Reolink wedge is tilted to the left or right at 15 degrees. I made these because I required a greater degree of leftward tilt and a small amount of downwards tilt.
Just like the original Reolink wedge, the hollow side faces forwards. Attach your metal mounting bracket to this 3d printed part.
The photos of the mount on the redbrick wall are of the 10 degree downward version.
Please post photos if you make this or find this useful.
| reolink_doorbell_mount_10down_25left.STL | 497.4KB | |
| reolink_doorbell_mount_20down_25left.STL | 483.8KB |
