Join the EnderXY community on Reddit:
https://www.reddit.com/r/EnderXY/
Uploaded to Printables on 24th February 2024
I'd recommend printing in PETG at least, although around 30% of my initial testing was done with PLA and didn't notice any issues.
Updated 03/06/24: Added arms for the StealthBurner and Xol toolheads to offset the bed correctly.
Updated 31/05/24: Updated the Klipper setup instructions to include the aux fans wiring.
Updated 25/03/24: Updated the Klipper setup instructions.
Updated 04/04/24: Updated the Klipper setup instructions to include the setup for the optional auxiliary fans.
Key Points:
Required Hardware:
M3:
M4:
M5:
Other hardware
Early test vid of the 3 point levelling:
Early test vid printing a 11 min benchy without 12032 aux fans:
(20k accel, 15k accel on outer walls and 1k accel on first layer. Speeds range from 300 to 450)
Make sure you read “RenderXY - Fixings List.PDF” and “RenderXY - Printed Parts List.PDF” before getting started, they will list the required hardware and printed parts.
You can then move onto “RenderXY - Installation.PDF” for the installation process.
The step file is available if anyone wants to remix a part.
(I will most likely be updating the rear motor mount (to allow the 2020 to soak some of the heat) in the future but it has proven to work well so far).
If you'd like to support my work you can here https://ko-fi.com/supavitax
10mm-hole-10mm-offset.stl | 102.0KB | |
2._RenderXY_-_Printed_Parts_List.pdf | 1.3MB | |
5mm-hole-10mm-offset.stl | 79.3KB | |
fan-housing-gdstime.stl | 359.6KB | |
front-left-arm.stl | 1.8MB | |
front-right-arm.stl | 1.8MB | |
Front_Left_Arm_-_StealthBurner_toolhead.stl | 1.8MB | |
Front_Left_Arm_-_Xol_toolhead.stl | 1.8MB | |
Front_Right_Arm_-_StealthBurner_toolhead.stl | 1.8MB | |
Front_Right_Arm_-_Xol_toolhead.stl | 1.8MB | |
housing-to-mid.stl | 267.0KB | |
left-bracket-rear.stl | 268.0KB | |
left-din-rail-spacer.stl | 411.4KB | |
left-rear-motor-mount-clamp.stl | 101.5KB | |
left-side-front-lower-gap-filler.stl | 39.3KB | |
left-side-rear-lower-gap-filler.stl | 60.6KB | |
left-top-cap.stl | 319.7KB | |
linear-rail-guide.stl | 25.5KB | |
mid-to-upper.stl | 196.5KB | |
Optional_Left_Top_Cap_-_Adjustable.stl | 332.5KB | |
Optional_Right_Top_Cap_-_Adjustable.stl | 339.2KB | |
rear-arm.stl | 1.5MB | |
rear-motor-mount.stl | 257.1KB | |
rear-top-cap.stl | 362.5KB | |
Rear_Arm_-_Xol_toolhead.stl | 1.6MB | |
Rear_Arm_v3_-_StealthBurner_toolhead.stl | 1.6MB | |
renderxy-complete-hardware-list.pdf | 36.6KB | |
renderxy-fixings-list.pdf | 27.6KB | |
renderxy-installation.pdf | 3.2MB | |
renderxy-klipper-setup.pdf | 282.4KB | |
renderxy-v106-release.step | 57.9MB | |
right-bracket-front.stl | 107.7KB | |
right-bracket-rear.stl | 244.1KB | |
right-din-rail-spacer.stl | 413.5KB | |
right-rear-motor-mount-clamp.stl | 101.5KB | |
right-side-front-lower-gap-filler.stl | 39.3KB | |
right-side-rear-lower-gap-filler.stl | 60.6KB | |
right-top-cap.stl | 326.5KB | |
upper-to-nozzle.stl | 298.1KB |