Inspired by stv-is-it I had to redesign it from scratch because I have another type of power plug. A neodym magnet of 10 mm high by 10 mm diameter is inserted in this "Thing". It will activate a Magnetic Switch which is hidden in the "Green-up" type power plug. That will activate the fast loading function of your ZE charger (see the photos, with and without this "Thing"). You'll notice that the remaining loading time shows 4h30 instead of 8h30).
When you buy an official wall mount charger box it does nothing else than activating the magnetic switch. Here it will cost you 20 min of print + few cents for the magnet.
IMPORTANT: Your power socket must be connected to a 16 A curve C breaker with a minimum of 2.5 mm² for the wires diameter. The breaker should be only connected to this power socket. Nothing else (no light, oven, wash machine, or whatever...). This is very important because if it is not done properly you may simply burn your house...
| Greenup_magnet_support_V2.stl | 281.5KB |
