Remix on of the cover keep Jimbotron's deck

For those who want the story :
Printing the remix of Jimbotron (https://www.thingiverse.com/thing:3698248) based on SpoonUnit (https://www.thingiverse.com/thing:3616094) I was not convinced by the official Logo, as i don't want any issue, I freely design o new one inspired by UNO logo (copyrighted by Mattel and was sourced from Wikimedia at https://commons.wikimedia.org/wiki/File:UNO_Logo.svg)
So thanks to every body, first for this funny game, and definitively for the great work of previous designers(Jimbotron and SpoonUnit indeed)

What I propose is to print the cover box with color inclusion in two colors... WHAT ?? with two colors ?? but I can only print one color at once with my printer (for the two colors printer I think you don't need me to help yourself :) )

Yes I confirm you will be able to enjoy the Jimbotron design with a simple but efficient logo totally integrated and without a disgracious logo to stick on the beautiful design of the cover ...and nothing to paint

How to make it ?

First you chose 2 compatible filament (same temp, speed, material, ideally brand ...) with 2 colors, ideally the two you have chosen for the cover and the deck.

Second step you take your favorite slicer (for me it's cura, but the other are very good too) and download the "UNO logo file" here
Print it in the color you want (my advise, choose the one of the deck)
Keep in mind the position you take to do the print (DON'T TAKE THE MIDDLE IF THE PRINT MAKE A BED LEVELING AT START)
Remove the rectangle around the logo printed (and just the rectangle)

Third step download the 'UNO cover box" and open it in your slicer activate the z hop parameter with a value at 0,6mm or higher (ensure your retrataction parameters are also good) for cura it's in "travel" "Z Hop when retracted" (activate retractation if not already done)
Place the print EXACTLY at the same position you printed the logo at step 2

And let the magic happening !

Enjoy

You want to tips, it's here : https://www.paypal.com/paypalme/FamaxFr

2021-02-01/2 Validated I share with you the first print ! I placed the two print in the middle and at the second print with the bed leveling it made a point in the middle in the "N" letter (I printed very quickly so your quality may be better)