Remixed Screw Boxes 3D Printer Model
The file 'Remixed Screw Boxes 3D Printer Model' is (stl) file type, size is 4.8KB.
The file 'Remixed Screw Boxes 3D Printer Model' is (stl) file type, size is 4.8KB.
I remixed this to be 4" tall with lid to fit in a drawer. In the 4" box, I removed the bottom lock channels as I intended them to be in a drawer and not stacked. This box will hold 3 boxes of screws.
I remixed the small box to be 2" with the lid. It's intended for the stray screws you accumulate over time. I made these shallow and kept the lock channels intact.
Printed the boxes with a .6mm print head with no supports. The little bit of stray printing you get from the overhangs doesn't affect the box closing and latching..
The lids are the original file as I only changed the height of the box to apply to my needs. I printed that with a .4mm head as it seems that the hinges and the overall print looked better with the smaller head.
It's not perfect and feel free to modify if you'd like.
| 2_inch_screwbox_v2.stl | 14.2KB | |
| 4_inch_screwbox_v1.stl | 12.7KB |
