A simple print-in-place bag clip remix.
Made the clips open at 15 degrees so they are printable on small-sized printer while keeping the two parts from sticking together.
Print with 3 perimeter for better strength.
Tested with ABS.
PETG might also work. Not sure about PLA.
| 100mm_15degree_sealing_clip.stl | 237.2KB | |
| 150mm_15degree_sealing_clip.stl | 223.6KB | |
| 50mm_15degree_sealing_clip.stl | 272.6KB | |
| 75mm_15degree_sealing_clip.stl | 246.5KB |
