First off, thanks for the great design!

It works nicely in its original form, but has some issues that i encountered along the way building it.

Namely:

• Electronic Enclosure
• Laser Module Shroud with magnetized focus finder
• Adapter (openable) to use industrial cable chains
• Sidebar to hold Y cable chain (originally dragging)
• Brandnew cable chain attachment
• Meshfixes to several parts

You can check them out in my make: https://www.thingiverse.com/make:1199771

I have added the Fusion360 files as needed. Fair warning, this was never supposed to be released, it is done very very dirty and on the go. If you use slightly different chinese parts you can adapt everything to your needs, thou a little fusion knowledge might be required (sometimes things might be partly german :D).

Fixed/New Parts:

Anti-Death Box: My live wire lying around on my working table got loose and i got bitten by it, dont be as retarded as me and build an electronics enclosure so there will be no more electrocutions.

Laser Module Shroud: I am using an old Creality Laser i had lying around, it came with a shitty plexi shroud that didnt fit anymore cause of different topography. I build it from scratch and added a magnet based distance measurement tool that fits with my fixed focus diode laser. Adapt to your needs.

Leiste: The original design lets the cable chain one Y drag on the floor. Hated it. I build a bar that holds the cable chain, is attached to existing architecture and looks nice while doing all of that. Its based on a standard bar of 1/4 quarter round from my cellar. You can get in any construction market for a few €, or just adapt the Fusion file for whatever you have around.

Laser Schraube: This is essential a working version of "LaserBELTknobs" (original file). The original has several issues including missing layers and very weak design. Made anew from scratch, now its indestructible.

Gantry Cable Chain Adapter: didnt like the original cable chain adapter on Y, made one i liked more. It now attaches to the 2 Screws Holding X.

Adapter: talking about cable chains: dont like printed ones. There are 5€/m chains available on ebay or amazon. Buy them. Its a pain to print one billion pieces. It will rarely work as well as an industrial 5€ chain. Bought the cheapest, then made adapters to fit them to the existing structures. Also made them openable, cause fixing this thing in its original form without being able to open chains at some point is just painfull. Fix with cable tie.

UpperLeftCornerFixed: opened it up you can do easier maintenance. Also fix with cable tie.

I hope these parts help anyone, have fun and protect your eyes! <3