I modified the original to use standard 608 bearings, made nut reliefs so only a screw driver is needed to open or close the unit. Added a .5mm round to most edges to eliminate most cleanup. I increased the 8mm stud openings to 8.2mm to improve fit. Added a center line on the blade end to aid in blade placement.
9-28-2015 added another version that has the bearing mounting recesses enlarged by 0.5mm to see it helps people fitting the bearings into the housing. The new files are P1,P2 and P3
10-18-2015 added an 8 to 6mm adapter mount 6x8mm 1 and 2
10-30-2015 updated all assembly screw holes to accept metric or ANSI bolts on parts P1, P2, and P3
| bearing_cover.mtl | 142.0B | |
| bearing_cover.obj | 1.7MB | |
| blade_cover.obj | 442.2KB | |
| body.obj | 2.8MB | |
| Design2.rsdoc | 2.0MB | |
| KnifeMount_6x8mm.rsdoc | 1.3MB | |
| Mount_6x8mm_1.stl | 12.7MB | |
| Mount_6x8mm_2.stl | 6.4MB | |
| P1.stl | 15.3MB | |
| P2.stl | 1.3MB | |
| P3.stl | 5.5MB |
