Reloading Cartridge Trays 3D Printer Model
The file 'Reloading Cartridge Trays 3D Printer Model' is (STL) file type, size is 811.4KB.
The file 'Reloading Cartridge Trays 3D Printer Model' is (STL) file type, size is 811.4KB.
Here are trays that will cover holding any caliber from 32ACP through 45-70. Each one holds 50pcs and the holes all have a .750" spacing between centers. The overall sizes vary based on the diameter of the cylinders, but they're all around .44" x 3.75" x 7.5". All floors and walls are 1mm thick.
Using Inland PLA @ $18 per kg shipped from amazon, these trays end up costing $1.25 each and take about 2.5 hrs at 55mm/s.
The 5.56 tray will work for 300blk, 32ACP, 380ACP, 9mm and other similar cartridges.
The 357 mag tray will work for 38spl, 40s&w, 10mm and other similar cartridges.
The 7.62x51 tray will work for 45ACP, 30-06 and other similar cartridges.
The 300WM tray will work for all belted magnums like the 7mag and 338WM.
The 45-70 tray should fit just about anything as it is massive.
| 300WM_Reloading_Tray.STL | 845.0KB | |
| 357_Reloading_Tray.STL | 843.1KB | |
| 44MAG_Reloading_Tray.STL | 808.1KB | |
| 5.56_Reloading_Tray.STL | 860.9KB | |
| 7.62_Reloading_Tray.STL | 838.6KB | |
| 70_Reloading_Tray.STL | 818.4KB |
