This is a fully 3d printed dust shoe to use a Dremel 3000 in combination of the rBot https://www.thingiverse.com/thing:1195229
For more instructions, pictures and videos please visit:
https://www.instagram.com/reittec/
To print the bristles I used a nylon Filament and a 0.4mm nozzle at a layer height of 0.3mm.
To create the broom I used 7 layers of the bristles.
The base and the mounting bracket are connected with the mounting_plate by using M5 screws and nuts. The tube has an outer diameter of 16mm.
| base.STL | 6.7MB | |
| bristles.STL | 3.3MB | |
| inner_shell.STL | 576.5KB | |
| mounting_bracket.STL | 713.3KB | |
| mounting_plate.STL | 472.1KB | |
| outer_shell.STL | 751.6KB | |
| STEPs.zip | 5.8MB | |
| tube_end.STL | 199.1KB | |
| vacuum_cleaner_adapter.STL | 2.6MB |
