Reinforced Inverted F1 G920 Steering Wheel 3D Printer Model
The file 'Reinforced Inverted F1 G920 Steering Wheel 3D Printer Model' is (stl) file type, size is 216.2KB.
The file 'Reinforced Inverted F1 G920 Steering Wheel 3D Printer Model' is (stl) file type, size is 216.2KB.
The wheel is a remix of https://www.thingiverse.com/thing:5410719, more specifically the v2 plate, so it seemed logical to name mine "v5".
You will also need the handle files from https://www.thingiverse.com/thing:3889532/files, and four M4*20 screws and four M4 nuts.
The modifications to the plate themselves were for reinforcement for better folding pressure resistance, as I printed the original one and it shattered on the inner rim, and superglue did not work... I added a circular rim and three reinforcement bars on each side, and punched six holes near the Xbox logo, just for looks. I also corrected a small mounting pressure error on the round plate part, where clips where applying pressure on the plate.
I also updated the buttons, but I recommend you modify them yourself, mine are good for button 7 and 8 but you will need to print them twice for the two remaining buttons, if not modify them to your liking.
Modifications made by cutting the part in half and reassembling it back in Tinkercad (to avoid file corruption). So there might be some slight tolerance errors, especially on button 9 and 10.
| Logitech_G920_Steering_wheel_-_v5.stl.stl | 547.5KB | |
| Updated_buttons.stl | 106.1KB |
![Macrotrack Oval Speedway Miniature [SAMPLE PACK] 3D Printer Model](https://cdn.3axis.co/assets/2b/6e/33/66/2b6e3366-4366-495c-9031-1eb3ba3a8e8c/images/9923d3d4-ab4a-4005-b273-a3f7491bec84_thumb.jpg)
