Reindeer Phone Stand 3D Printer Model
The file 'Reindeer Phone Stand 3D Printer Model' is (stl) file type, size is 21.2MB.
The file 'Reindeer Phone Stand 3D Printer Model' is (stl) file type, size is 21.2MB.
If you want to sell prints of this models you can buy a commercial license here:
https://cults3d.com/en/3d-model/gadget/reindeer-commercial-license
Check out more models from Phone collection
https://www.thingiverse.com/c47_3d/collections/39433281/things
and Xmas collection
https://www.thingiverse.com/C47_3D/collections/17109714/things
or Piggy collection (there are phone stands too)
https://www.thingiverse.com/C47_3D/collections/17109797/things
A lot of versions to print
Each with full body or with space for a phone (6-16mm - as in file names and on the bottom of models)
Phone will be at 16° angle. Should work with horizontal and vertical placing (tested with 12mm phone with 12 and 14mm reindeer versions)
To resize the models use the equasion:
'Needed space (in milimeters)' divided by 'model number' multiplied by 100% = 'Needed model size in percent'
For example if you need more stable 16mm you can take 10mm version resized to: 16 / 10 * 100% = 160%
To make a Keyring use a model of your choice and add there a keyring addon (Reindeer_KEYRING-addon). Both models should be in the exact same position in your slicer to be sure that they will merge properly
Model printed in parts has separate back hooves with a keyring - no need to use an addon
Then select both models and merge them (right click menu)
Keyring models are with a 'frame', a flat surface that will not be printed. This way it is easy to set it in the right spot - Ignore model 'errors' and DO NOT try to 'fix' the model
After merging you can easly resize or rotate the model if needed
The same with Reindeer_PARTS_eyes-addon wich can be used with Reindeer_PARTS
This model adds eyes like in SOLID model, instead of holes for filament
MULTI
All models are with an 'outline', flat model that will not be printed
The same like with a Keyring
Normal color for body should be brown but chose what you want
'dark-brown' is with antlers and front and back hooves - I will add separate models if needed
'red' is with a nose
PARTS
As it is harder to print I added separate models (with dual antlers and hooves)
After assembling the parts should stay where they are
You will hear a 'click' sound when it's pushed all the way
For eyes you need few mm of filament (preferably a black one)
If you don't want to do this (may be difficult) you can leave holes like it is (as on few models on photos) or use Reindeer_PARTS_eyes-addon to fill the holes and print it with a body (merged together)
Pliers may be usefull for assembling, especially with eyes and antlers
Hooves are symetrical so it doesn't matter what will go to the left and what to right
Back hooves are bigger than front ones
I printed antlers and all hooves together in one print
I don't think it should be used by smaller kids (0-3yo)
Antlers may break. It will be too small to choke but still...
UPDATE 28 XII 2023
Changed file names from 3COL to MULTI to avoid mistakes (multi color printing vs printing in parts)
UPDATE 06 I 2024
Added versions for 6-9mm phones
UPDATE 05 IV 2024
Updated PHONE models
Now they are with numbers on the bottom to show what size it is after printing it
Changed Keyring addon a little - should work better
Added 'mm' to numbers in file names to avoid rare confusions
| Reindeer_KEYRING-addon.stl | 23.3KB | |
| Reindeer_MULTI_body.stl | 771.1KB | |
| Reindeer_MULTI_body_PHONE_10mm.stl | 804.3KB | |
| Reindeer_MULTI_body_PHONE_11mm.stl | 801.9KB | |
| Reindeer_MULTI_body_PHONE_12mm.stl | 797.9KB | |
| Reindeer_MULTI_body_PHONE_13mm.stl | 795.5KB | |
| Reindeer_MULTI_body_PHONE_14mm.stl | 791.8KB | |
| Reindeer_MULTI_body_PHONE_15mm.stl | 787.7KB | |
| Reindeer_MULTI_body_PHONE_16mm.stl | 784.3KB | |
| Reindeer_MULTI_body_PHONE_6mm.stl | 814.2KB | |
| Reindeer_MULTI_body_PHONE_7mm.stl | 810.5KB | |
| Reindeer_MULTI_body_PHONE_8mm.stl | 806.9KB | |
| Reindeer_MULTI_body_PHONE_9mm.stl | 803.3KB | |
| Reindeer_MULTI_dark-brown.stl | 587.7KB | |
| Reindeer_MULTI_red.stl | 39.0KB | |
| Reindeer_PARTS_antlers.stl | 107.9KB | |
| Reindeer_PARTS_body.stl | 862.5KB | |
| Reindeer_PARTS_body_PHONE_10mm.stl | 847.2KB | |
| Reindeer_PARTS_body_PHONE_11mm.stl | 843.7KB | |
| Reindeer_PARTS_body_PHONE_12mm.stl | 838.9KB | |
| Reindeer_PARTS_body_PHONE_13mm.stl | 835.3KB | |
| Reindeer_PARTS_body_PHONE_14mm.stl | 831.8KB | |
| Reindeer_PARTS_body_PHONE_15mm.stl | 827.4KB | |
| Reindeer_PARTS_body_PHONE_16mm.stl | 822.7KB | |
| Reindeer_PARTS_body_PHONE_6mm.stl | 859.1KB | |
| Reindeer_PARTS_body_PHONE_7mm.stl | 855.3KB | |
| Reindeer_PARTS_body_PHONE_8mm.stl | 850.5KB | |
| Reindeer_PARTS_body_PHONE_9mm.stl | 845.7KB | |
| Reindeer_PARTS_eyes-addon.stl | 72.3KB | |
| Reindeer_PARTS_hooves-back.stl | 115.9KB | |
| Reindeer_PARTS_hooves-back_KEYRING.stl | 145.8KB | |
| Reindeer_PARTS_hooves-front.stl | 131.7KB | |
| Reindeer_PARTS_nose.stl | 54.3KB | |
| Reindeer_SOLID.stl | 1.3MB | |
| Reindeer_SOLID_PHONE_10mm.stl | 1.3MB | |
| Reindeer_SOLID_PHONE_11mm.stl | 1.3MB | |
| Reindeer_SOLID_PHONE_12mm.stl | 1.3MB | |
| Reindeer_SOLID_PHONE_13mm.stl | 1.3MB | |
| Reindeer_SOLID_PHONE_14mm.stl | 1.3MB | |
| Reindeer_SOLID_PHONE_15mm.stl | 1.3MB | |
| Reindeer_SOLID_PHONE_16mm.stl | 1.3MB | |
| Reindeer_SOLID_PHONE_6mm.stl | 1.3MB | |
| Reindeer_SOLID_PHONE_7mm.stl | 1.3MB | |
| Reindeer_SOLID_PHONE_8mm.stl | 1.3MB | |
| Reindeer_SOLID_PHONE_9mm.stl | 1.3MB |
