Card kit model of reindeer.
Re-Design of my model 2686435
Easy to print.
"thick frame version" is added frame thickness, to avoid unintentional breakage.

If your printed model is too tight to assemble , please adjust clearance like below.
Set slicer scale Z = 93%, you can print 0.1mm thinner.
If you want to make 0.2mm thinner, set it to 86%.

You can download sleigh from here https://www.thingiverse.com/thing:3926757
The card version of the sleigh is same size of this reindeer organized card.

[Size]
Assembled W90 x D30 x H90 mm
Card (Original ) W118 x D78 x t1.4 mm
Card (Organized) W148 x D78 x t1.4 mm

[Material] ABS,PLA about 8 - 9g

[TIP]
Now "TIP DESIGNER" button in my profile page is activated ^_^
I am very happy even a few.

[Buy me a coffee]
Or buy me a cup of coffee from following adress.
https://www.buymeacoffee.com/shink

[Parts]
If you want to display with some LED lights please get it from here
[ eBay ] Christmas light

[Indoor]
Fairy lights 1-10M LED String Copper Wire Fairy lights For Christmas

[Outdoor]
Outdoor christmas lights led string 100M

[Printer]
If you are serching next printer ...
Eender-3 Pro
220x220x250mm Creality 3D
Eender-3 V2
220x220x250mm Creality 3D
CR-10S Pro V2
300x300x400mm Creality 3D

[Recommended nozzle]
V6 Nozzle
Trianglelab Top quality V6 Nozzle for 3D printers

[History]
11/21/2018 Separated : If you do not need frame , print separated set.
11/22/2018 Update separated part 6. Correct wrong part.
11/25/2018 Organized version is uploaded.
12/11/2018 Optional sleigh is added https://www.thingiverse.com/thing:3273319
10/20/2019 New sleigh https://www.thingiverse.com/thing:3926757
12/31/2019 Reorganaized V2 (fixed head slot width of body)
11/14/2021　Reorganaized V3 (fixed runner separating body and make problem with combing in CURA)