Regular Castle Stonework Seamless Texture Roller Rolling Pin 6″ Wide 3D Printer Model
The file 'Regular Castle Stonework Seamless Texture Roller Rolling Pin 6″ Wide 3D Printer Model' is (STL) file type, size is 10.3MB.
The file 'Regular Castle Stonework Seamless Texture Roller Rolling Pin 6″ Wide 3D Printer Model' is (STL) file type, size is 10.3MB.
Here's another shot at creating a textured rolling pin (this time regular castle wall stonework) for making walls for your scenic (28mm) terrain.
The model is 6 inches wide. One turn should theoretically give you a 6"x6" textured area.
It is based on a seamless (in both x & y directions) texture, so if you line it up correctly (put a mark on the side of the roller) it should produce a seamless pattern on your surface.
If you don't have a suitable paint roller handle, try using a screwdriver for the axis.
For foam you need quite high pressure to get a good pattern. Another standard medium is air-dry polymer clay on MDF or plastic card. Let the clay dry for 10mins then use the roller. Use an old toothbrush to keep it clean.
I print at 0.1mm to get best texture results, but your call!
Good luck and show off your results!
PS Any tips for beer are welcomed now I'm retired!
| regular_stonewall_rollpin3mm_FINAL.STL | 11.6MB |
