DIY Kalkwasser Stirrer with WI-FI and advance Web UI Interface.
With build in high precise peristaltic pumps, ATO.
Open source Micropython firmware
https://github.com/telenkov88/ReefRhythm-Lime-a-thon/tree/master
Custom pcb:
https://github.com/telenkov88/ReefRhythm-Lime-a-thon/tree/master/hardware/pcb
Thread on reef2reef:
https://www.reef2reef.com/threads/diy-kalk-stirrer-with-wi-fi.1043776/
Materials needed:
110mm Acrylic pipe for reactor
110mm Acrylic circle for bottom
10mm Acrilic rode
6mm Acrylic pipe for limewater drain and ATO
3M stainless steel screw 6mm and 10mm long
3Mx3.2mm(OD) 3mm 3d printing inserts
| pcb_tray.stl | 229.2KB | |
| pcb_tray_lid.stl | 29.6KB | |
| ReefRhythm_Lime-a-thon_v21.f3d | 17.5MB | |
| Sensor_holder.stl | 71.8KB | |
| shaft_couplet.stl | 157.0KB | |
| stirrer_lid1.stl | 123.8KB | |
| stirrer_lid2.stl | 334.2KB | |
| Stirrer_pump_case.stl | 220.4KB | |
| Turbine.stl | 1.4MB |
