Printed with PETG at 235 and 70 bed on CR-10S, supports touching build plate only. I heated the piece a bit with a heat gun when screwing in the first time to cut the threads in the plastic, because I had some cracking the first time around. fixed it easily enough with some glue. I used M3 hex head screws to mount magnets for my Redcat RDS with a Matrixline Evo body.
| Redcat_RDS_front_body_magnet_mount.stl | 384.2KB | |
| Redcat_RDS_rear_body_magnet_mount.stl | 308.0KB |
