Red Rocket Station Fallout Wasteland Warfare 3D Printer Model
The file 'Red Rocket Station Fallout Wasteland Warfare 3D Printer Model' is (stl) file type, size is 6.3MB.
The file 'Red Rocket Station Fallout Wasteland Warfare 3D Printer Model' is (stl) file type, size is 6.3MB.
Found the Red Rocket station over on www.tinkercad.com Scaled it down to be closer to fallout wasteland warfare scale with is. About 32mm Scale. The model printed very well for me. I didn’t do the best job gluing it together, it’s not square but that is my fault. Also the side roof trim I need to scale to be about 5mm longer or so, nut since I will be weathering it to look aged I will just make the gaps look like damage. I am not print out the Rocket and “cover” to keep it simpler to store. I think I it’s a little larger than it needs to be but I wanted more room inside the model to place objects and have battles inside. If you want to change it up some just search for it over on tinkercad. Mine is called “Fallout Red Rocket Station Scaled”. But just to be clear I did not create the original I don’t know who did, but there are many floating over there. I may print the rocket out later to look fallen over but I didn’t have the PLA to do it right now. This is all printed at .2mm mostly due for time. Each wall section was about 4-5 hour. I had to break the roof and Base in to quarters to fit on my print bed. Also the sign support from the original was way too thin and did not print well. So I recreated it. Also madesome aligning blocks to raise the roof to a level to make roof trim easier to place the trim. Once done I used the blocks on the bottom of roof help hold it in place. Also I used tinkercad to copy the wall sections and make an interior wall. I also pulled the “Columns” off the wall and printed those so they would hold the inner wall in place. The inner wall is removable. On the walls I printed with brims and supports. The Corner sections I printed upside down and this removed the need for supports.
Items I printed to use with the station
Dumpster https://www.thingiverse.com/thing:2622610
Rooftop HVAC Ducts https://www.thingiverse.com/thing:2618055
Power Armor Station https://www.thingiverse.com/thing:2326702
Ice Machine https://www.thingiverse.com/thing:3084686
Fallout Workshop https://www.thingiverse.com/thing:2990048
Nuke Cola Machine https://www.thingiverse.com/thing:3110329
Wasteland Bed https://www.thingiverse.com/thing:3053873
Corvega Car https://www.thingiverse.com/thing:2919877
| Garage_Corner.stl | 1.5MB | |
| Garage_Front.stl | 2.0MB | |
| Garage_wall_back.stl | 387.1KB | |
| Garage_wall_left.stl | 1.9MB | |
| Garage_Wall_Right.stl | 2.0MB | |
| GBase_1.stl | 35.0KB | |
| GBase_2.stl | 35.3KB | |
| GBase_3.stl | 34.2KB | |
| GBase_4.stl | 37.7KB | |
| Inner_Wall.stl | 3.5MB | |
| Red_Rocket_Sign.stl | 295.4KB | |
| Roof_1.stl | 47.7KB | |
| Roof_2.stl | 47.7KB | |
| Roof_3.stl | 48.0KB | |
| Roof_4.stl | 47.9KB | |
| Roof_Alignment_jig.stl | 684.0B | |
| Roof_Trim_Back.stl | 24.6KB | |
| Roof_Trim_Corner.stl | 196.7KB | |
| Roof_Trim_Side..stl | 24.6KB | |
| Sign.stl | 295.6KB | |
| Sign_Spport_v2.stl | 12.6KB | |
| Text_Red_Rocket_sign.stl | 246.9KB | |
| Tires.stl | 6.4MB | |
| Wall_Column.stl | 242.0KB |
