Red Hood Helmet (Batman) With Details 3D Printer Model
The file 'Red Hood Helmet (Batman) With Details 3D Printer Model' is (stl,pdf) file type, size is 24.8MB.
The file 'Red Hood Helmet (Batman) With Details 3D Printer Model' is (stl,pdf) file type, size is 24.8MB.
Checkout my other Red Hood helmets on our website:
https://villainouspropshop.com/
So after I posted my previous Red Hood Helmet, I was asked if I could add the details to the helmet. So here they are. Enjoy.
This helmet is sized for an adult male. Please check PDF file for dimensions. Units are in millimeters. I would recommend to print at 105%-107% scale.
| Part_10_v2.stl | 1.7MB | |
| Part_11_v2.stl | 599.9KB | |
| Part_12_v2.stl | 1.1MB | |
| Part_13_v2.stl | 997.1KB | |
| Part_14_v2.stl | 751.5KB | |
| Part_1_v2.stl | 605.2KB | |
| Part_2_v2.stl | 1.7MB | |
| Part_3_v2.stl | 2.0MB | |
| Part_4_v2.stl | 1.1MB | |
| Part_5_v2.stl | 737.1KB | |
| Part_6_v2.stl | 984.7KB | |
| Part_7_v2.stl | 1.1MB | |
| Part_8_v2.stl | 1.1MB | |
| Part_9_v2.stl | 2.0MB | |
| Red_Hood_Helmet_v2.stl | 14.7MB | |
| Red_Hood_Helmet__Backv2.stl | 2.4MB | |
| Red_Hood_Helmet__Frontv2.stl | 12.5MB | |
| Red_Hood_Reduced_Drawing_v1.pdf | 466.6KB |
