Red Bull 8.4oz Can Fridge Dispenser Rack 3D Printer Model
The file 'Red Bull 8.4oz Can Fridge Dispenser Rack 3D Printer Model' is (stl) file type, size is 361.6KB.
The file 'Red Bull 8.4oz Can Fridge Dispenser Rack 3D Printer Model' is (stl) file type, size is 361.6KB.
I made this ridiculous thing because my wife likes Red Bull, I drink it occasionally, and when we take cans out of the fridge we forget to replace them half of the time. This Red Bull dispenser holds a full 24-pack case of 8.4oz Red Bull and fits within a footprint of about 375mm/15 inches deep, 160mm/6.5 inches wide and 290mm/11.5 inches tall including the clearance the cans need on the top. I have it in the bottom of an EdgeStar KC3000 kegerator which has been converted to normal mini fridge mode. The dispenser would also work to hold Red Bull outside of the fridge if you so desire.
This was inspired by ljhtom's generic drink dispenser which can be scaled for different can sizes. I scaled that design for Red Bull cans and it worked ok, but only held 11-ish cans and I had a lot of space above it in the fridge so I decided to make something more suited to Red Bull.
Pieces are sliced such that they should all fit on a 250x250mm print bed. Some supports are required but I tried to minimize them. It's designed to not need any extra parts or fasteners, and to hold together based on assembly. It took a few revisions to get it to work well and be fairly sturdy - I think it's pretty neat! If you think so too, you can buy me a coffee (though it's certainly not expected) - thanks!
| Rail_1L_Lower_Front.stl | 35.2KB | |
| Rail_1R_Lower_Front.stl | 46.2KB | |
| Rail_2L_Level_1-2.stl | 81.4KB | |
| Rail_2R_Level_1-2.stl | 103.3KB | |
| Rail_3L_Level_2-3.stl | 105.6KB | |
| Rail_3R_Level_2-3.stl | 127.4KB | |
| Rail_4L_Level_3-4.stl | 93.7KB | |
| Rail_4R_Level_3-4.stl | 115.6KB | |
| Rail_5L_Top_Front.stl | 33.3KB | |
| Rail_5R_Top_Front.stl | 44.2KB | |
| Ramp_1_Lower_Front.stl | 147.3KB | |
| Ramp_2_Lower_Rear.stl | 65.1KB | |
| Ramp_3_Level_2.stl | 87.8KB | |
| Ramp_4_Front_Main_Logo.stl | 610.2KB | |
| Ramp_5_Level_3.stl | 84.9KB | |
| Ramp_6_Upper_Rear.stl | 95.7KB | |
| Ramp_7_Level_4.stl | 78.5KB | |
| Ramp_Locking_Peg_1_Long.stl | 41.5KB | |
| Ramp_Locking_Peg_2_Short.stl | 35.6KB |
