I have seen these style of record mounts online and think they are a super cool way to display your favorite albums.

I decided to take a crack at designing a mount that would securely hold the album jacket and the vinyl on the wall. The The slot to hold the album sleeve is thin enough that your record should sit upright and not lean forward. I have also added a spacer around the peg for mounting the record so that the actual vinyl does not touch the mount, only the label.

The screw holes are easily accessible by screw driver or drill/driver. The holes were designed for a #8 or #10 screw, however any standard screw should fit, just check once you have it printed. I also aligned the screw holes vertically so that it can be mounted to one stud.

V1 is designed to be printed laying down and V2 is designed to be printed standing up, either way should print and work just fine. V2 was designed so that I would not need to print with supports.

Warning While this style of vinyl wall mount looks really cool, and allows you an easy way to display those cool multi colored discs, dust is likely to settle on your record. Just make sure to check online for proper cleaning of vinyl, and give it a good clean before you throw it on your turntable.

Thanks for reading and please share if you decide to give this mount a try!