Recalbox-JAMMA SSD Case 3D Printer Model

Author: @
License: CC BY-NC-SA
File formats: stl
Download type: zip
Size:243.1KB

The file 'Recalbox-JAMMA SSD Case 3D Printer Model' is (stl) file type, size is 243.1KB.

Description Files (3)

Summary

Happy owner of a Recalbox-JAMMA, I wanted to put an old SSD with my Recalbox-JAMMA rather than buying an SD card for 2 reasons:

  • the first: the lifespan of an SSD compared to an SD card.
  • the second: the USB adapter is cheaper than an SD card.

I therefore offer you my creation which will be installed below your RecalBox-JAMMA.
You will need :

  • 1 recovery SSD, which we ended up having quite easily (with a maximum height of 9.5 mm.)
  • 1 SATA to USB 3 adapter, this one is really good and takes up little space.
  • 4xM3 16mm screws and their nuts
  • 8xM3 5mm screws to fix the SSD.

If you do a full install of Recalbox on the SSD and not just use it as a sharing folder.
Since the Raspberry Pi5 is powered by our candy cab, it will certainly be necessary to add the line “usb_max_current_enable=1” in /boot/config.txt for it to start.

Recalbox-JAMMA_SSD_Case_Buttom.stl 753.7KB
Recalbox-JAMMA_SSD_Case_patch.stl 11.4KB
Recalbox-JAMMA_SSD_Case_Top.stl 129.2KB

Tags

You might also like

MINI BOX RASPBERRY PI 3B / B+ 3D Printer Model
MINI BOX RASPBERRY PI 3B / B+ 3D Printer Model