I made this for some of the new Skaventide models' bases. I plan on chopping it up and continuing on with creating some destressed walls. This is based on the Games workshop creation but is of my own work.
PLEASE LET ME KNOW IF YOU HAVE ANY DIFICULTY PRINTING.
EDIT 1:
fixed the bottom of the wall bricks as they were misaligned. unattached rivets fixed on all models
EDIT 2:
after printing in resin I've noticed the bricks are not very defined so I've enlarged the gaps on the whole wall and will have to go back and resolve in other models.
EDIT 3:
fixed the voids in the whole wall should be suitable for resin prints now. Still working on window model. Added a modular section of wall so that you can extend anything.
EDIT 4:
Fixed window wall.. now suitable for resin.
EDIT 5:
Added door section with separate door.
EDIT 6:
Added Skaventide parts (bell door and torch)
| Realmscape_door_closed.stl | 8.4MB | |
| Realmscape_door_closed_module.stl | 6.7MB | |
| Realmscape_door_open.stl | 4.9MB | |
| Realmscape_door_open_module.stl | 3.1MB | |
| Realmscape_door_seperate.stl | 3.8MB | |
| Realmscape_pillar.stl | 2.0MB | |
| Realmscape_pillar_broken_base.stl | 1.5MB | |
| Realmscape_pillar_broken_top.stl | 800.5KB | |
| Realmscape_wall_modular.stl | 8.2MB | |
| Realmscape_wall_rubble_1.stl | 3.7MB | |
| Realmscape_wall_window.stl | 9.7MB | |
| Realmscape_whole_wall.stl | 9.9MB | |
| skaventide_wall_bell_module.stl | 9.9MB | |
| skaventide_wall_bell_whole.stl | 11.7MB | |
| skaventide_wall_door_module.stl | 8.8MB | |
| skaventide_wall_door_whole.stl | 10.4MB | |
| skaventide_wall_torch.stl | 9.6MB |
