Realistic Strawberry Planter Plant Pot 3D Printer Model
The file 'Realistic Strawberry Planter Plant Pot 3D Printer Model' is (stl) file type, size is 18.3MB.
The file 'Realistic Strawberry Planter Plant Pot 3D Printer Model' is (stl) file type, size is 18.3MB.
If you want to follow more of my work, or want me to print one of these for you,
-------- UPDATE ---------
Use files "strawb_base_2.stl" and "strawb_version_2.stl"
I've edited how the strawberry was hollowed (for easier printing, and smoother inside), and improved the base.
Print both the strawberry and the base at the same % size. (i.e. 200% bigger or 300% bigger). they should connect with push fit - if it's a little tight then a light sanding should do the trick.
--------- ORIGINAL ---------
My sister wanted a strawberry planter so I made this.
Remixed from Strawberry by GSC_Nakamura (a 3D scan of an actual strawberry)
The stem was removed, the bottom and top flattened and the whole model smoothed. The inside was cut out to make space for a plant.
I printed with pla, 02mm, no supports. Make sure you have GOOD bed adhesion - it's a little top heavy. Size printed at 250% or 300% model size. I can't remember.
painted with acrylic paints and sealed with plasticote sealer.
| strawberry_base_stand.stl | 58.7KB | |
| strawb_base_2.stl | 80.6KB | |
| strawb_for_thingy.stl | 13.0MB | |
| strawb_version_2.stl | 21.9MB |
