RWD drift conversion for wltoys k969. Designed for 5g servo(afrc d1802mg best chose) and wltoys stock motor and esc.
Require
1.2mm drill
1.5mm drill
2.1mm drill
m1.4 tap screw - use on orlandoo rod ends before
mf106zz - 2
mf63zz - 2
mr63-2(2mm thickness) - 8
3x35mm brass shaft
123a gear - 1
152a gear - 1
You can generate gears on https://www.stlgears.com/generators/3dprint
orlandoo ball head - 8
orlandoo rod ends - 8
wltoys k969 shocks - 3
wltoys k969 or k989 old diff - 1
wltoys k969 universal drive shaft - 4
m1.4 screws 4mm, 8mm, 10mm and 14mm
m2x4 and m2x6 roundhead screws
m2x4 and m2x6 countersunk screws
prints settings
nozzle 0.4mm
layers 0.06mm
use supports on rdc basic servo only
material: all PLA, only rdc basic motor holder PETG
| rdc_basic_front.STL | 666.5KB | |
| rdc_basic_gears.STL | 926.9KB | |
| rdc_basic_instruction.pdf | 7.2MB | |
| rdc_basic_lower_plate.stl | 153.2KB | |
| rdc_basic_motor_holder.stl | 66.8KB | |
| rdc_basic_rear.stl | 749.7KB | |
| rdc_basic_servo.STL | 172.3KB | |
| rdc_basic_upper_plate.STL | 51.1KB |
![3D Printed RC Car V3 — Tarmo3 — Front Parts [1/3] 3D Printer Model](https://res.3axis.co/78c8fe88-710f-43ba-a74e-e5ef76fce200/images/2c8e6f1d-3d71-40ee-8f0e-e292eab52d11_thumb.jpg)
