Canada's RCAF 431 Air Demonstration Sqn "Snowbirds" is a 9 jet air demonstration team using the Canadair CT-114 Tutor jet.
There are 2D larger prints and small 2D fridge magnet prints. Have not printed the large ones yet.
Used the bottom profile because of the distinctive white logo against the red.
Looks good on a white fridge. For use on stainless steel or other colored fridges, I included a filled in profile back ground to be printed white and glued to the magnet side.
Magnets: 6 x 2 mm. (Actual size of my magnets was 6mm x 1.71mm) The magnet holes are 6.2mm x 2 mm deep. Tight fit. A small drop of super glue. Used needle-nosed plyers to squeeze the magnets in.
The diagrams of Formation the Snowbirds fly can be found on their official website. Search Snowbirds Formation.
Version 2.0
V2.0 is now a White base that hold the magnets. The V2.0 Red Top is printed at .8 mm and glued on top of the white base.
| RCAF_Snowbirds_Jet_back_ground_Fridge.stl | 107.9KB | |
| RCAF_Snowbirds_Jet_Larger-No_Magnet_Holes.stl | 121.6KB | |
| RCAF_Snowbirds_Jet_Larger-_2D_Minimal_No_Lettering.stl | 262.1KB | |
| RCAF_Snowbirds_Jet_Larger-_2D_Minimal_With_Lettering.stl | 341.3KB | |
| RCAF_Snowbirds_Jet_Larger-_2D_some_fill_without_Lettering.stl | 252.3KB | |
| RCAF_Snowbirds_Jet_V2.0_RED_Top_Fridge_Mag.stl | 114.1KB | |
| RCAF_Snowbirds_Jet_V2.0_White_Fridge_Mag_Base.stl | 130.6KB | |
| RCAF_Snowbirds_Jet__Fridge_Mag.stl | 137.9KB |
