11/15/22: Edit - my mistake, as this model is actually a Wasp-class LHD and not an LHA as I previously thought - thanks to ThanatoST for pointing this out!!
I really nice model of an LHD from Aniket0s that I had wanted to make as a modern vessel that includes the MH-60S Helicopter that my son flies in the Navy. I have enlarged the model to about 42" long and cut it up to fit on most FDM printers with a bed size of at least 220mm.
Since the original model was cut at the water level, I added some hull below the waterline, which made the prop positions off, but should still work for a dual prop layout and still look great in the water. The prop shafts have been hollowed out for easy RC work.
I have also included the common modern-era aircraft typically on the with modification, wheels down, etc., as well as other props (boats, life rafts (scale as needed), etc.)
Edit 5/11/22: Added the pieces for the superstructure - forgot to include originally!
| F-35C_scaled.stl | 2.4MB | |
| Gig_Life_boat.stl | 2.3MB | |
| Harrier_Jet-scaled.stl | 1.0MB | |
| LHA6_America.3mf | 1.3MB | |
| LHA6_America.stl | 4.5MB | |
| LHA6_Deck_1_.stl | 1.8MB | |
| LHA6_Deck_1_elevator.stl | 176.5KB | |
| LHA6_Deck_2.stl | 618.4KB | |
| LHA6_Deck_3.stl | 1.1MB | |
| LHA6_Deck_4.stl | 546.5KB | |
| LHA6_Deck_5.stl | 884.7KB | |
| LHA6_Hull4_elevator.stl | 615.6KB | |
| LHA6_Hull_1.stl | 1.7MB | |
| LHA6_Hull_2.stl | 344.6KB | |
| LHA6_Hull_3.stl | 1.3MB | |
| LHA6_Hull_4.stl | 1.7MB | |
| LHA6_Hull_5b.stl | 4.1MB | |
| LHA6_SS_1.stl | 811.0KB | |
| LHA6_SS_2.stl | 5.6MB | |
| LHA6_SS_3.stl | 5.5MB | |
| LKA116-Life_boats_125.stl | 2.9MB | |
| MH-60S_Seahawk-scaled.stl | 11.3MB | |
| Viper_Cobra-scaled.stl | 994.3KB |
