RC Sport Cockpit Set 3D Printer Model
The file 'RC Sport Cockpit Set 3D Printer Model' is (stl) file type, size is 8.0MB.
The file 'RC Sport Cockpit Set 3D Printer Model' is (stl) file type, size is 8.0MB.
A sport "scale" cockpit set for an RC plane. Pilot, seat and a small dashboard - something to fill the canopy!
The pilot needs to be printed with supports for the overhang on the mask - I found that the standard supports in Cura worked fine, for all sizes from 25mm height upwards.
Update:
I was messaged asking what scale this model is, and how to adjust for different scales, so have copied the response here for anyone else that might need it:
This model is very approximate 1/11th scale pilot
The way I work out the scale of the mode is to simply divide the real scale wingspan by your model's wingspan (using the same units)
e.g Mustang wingspan = 37ft = 11277 mm. Divide this by your model's wingspan: 11277/1100 = 10.25. So you need a 1/10th scale pilot.
This one is approximately 11% scale, so in your slicer you can rescale as follows (all figures are VERY much estimations!):
1/7th scale pilot = 170% enlargement of this
1/8th scale pilot = 150% enlargement of this
1/9th scale pilot = 130% enlargement of this
1/10th scale pilot = 115% enlargement of this
1/11th scale pilot = No scaling required
1/12th scale pilot = 98% reduction of this
| cockpit.stl | 8.4MB | |
| dashboard.stl | 12.2KB | |
| Pilot.stl | 7.1MB | |
| seat.stl | 1.4MB |
