TPU Paddles for the tracks.
DO NOT PRINT THESE IN PLA
The retaining clips are way too big and you wont be able to insert them in place
UPDATE 2023-01-11 - Updated to V2 (It's basically the same but the retaining clips are a little bit shorter to fit with the now thinner tracks)
It can be printed using a stock Ender 3 Pro using ±95A TPU (0.4mm nozzle works but it's way easier with a 0.6mm nozzle if you have one)
Settings :
Walls : 2
Top Layers : 0
Bottom Layers : 0
Infill : 100%
Infill Pattern : Zig Zag
Printing Temp : 225C
Print Speed : 40mm/s
Retraction Distance : 4mm
Retraction speed : 20mm/s
| MHST_V2_-_TPU_13_Paddles.stl | 311.1KB | |
| MHST_V2_-_TPU_1_Paddle.stl | 24.0KB | |
| MHST_V2_-_TPU_6_Paddles.stl | 143.6KB |
