RC Snow Tracks – No Hardware 3D Printer Model

Author: @
License: CC0
File formats: stl
Download type: zip
Size:1.0MB

The file 'RC Snow Tracks – No Hardware 3D Printer Model' is (stl) file type, size is 1.0MB.

Summary

RC Snow Tracks for 1/10 scale models.

It should fit any car with a standard 12mm Hex Wheel Mount.

UPDATE - 2023-06-14

  • Added Single Link. Could be useful if you have problems printing the tracks as a print-in-place mechanism. (Some people got tracks that were all stuck together and would not move). Feel free to print every link separately but you will need cotterpins for every junction. I haven't tested this however... The whole track could end up being too loose.

IMPORTANT UPDATE - 2023-01-11

  • Added straight cotter pins for the tracks (Using filament pieces still works but unprinted filament become brittle when exposed to moisture and tend to break in little pieces inside the joint, causing uneven stress on the tracks tiny loops). Print those cotter pins at 100% zig-zag infill and they will last much longer than unprinted filament. Even better if you can make them in TPU, they will absorb shock a little bit

Video : https://youtu.be/1Dnh0IAAjnM

Google drive link containing :
-Zip file with All STL + pictures
-Quantity & Recommanded Settings
-Source Files (.skp) (Sorry, I cant export .step with Sketchup)

https://drive.google.com/drive/folders/17OXFpnlUMfuRUtHy__7YA4xD5zRkplYg

Enjoy !

UPDATE - 2023-01-11 - Uploaded version 2.

  • The tracks are redesigned to be both stronger and lighter
  • Added U-Shaped cotter pins to reduce assembly time of the frames.
  • Added straight cotter pins for the tracks (Using filament pieces still works but unprinted filament become brittle when exposed to moisture and breaks in little pieces inside the joint, causing uneven stress on the tracks tiny loops).
  • Added a few minor tweaks here and there.

UPDATE - 2022-03-02 - Added Anti-Rotation (TRX-4) - V4 (I do not own a TRX-4 but someone told me that the V3 was too small to fit. V4 is a little bit bigger)

UPDATE - 2022-02-28 - Added Repair Link (A single track link with loops on both end)

UPDATE - 2022-02-27 - Added Anti-Rotation for Element Gatekeeper

UPDATE - 2022-02-25 - Added Anti-Rotation (Capra) - V8 (Should be a bit stronger)

UPDATE - 2022-02-23 - TPU Paddles : https://www.thingiverse.com/thing:5260569
They can be printed using a stock ender 3 pro if using the TPU mentioned in the description. (Or probably any 95A or harder I guess...)

UPDATE - 2022-02-19 - Added Anti-Rotation (TRX-4) - V3 (Should be a LOT stronger than before)

UPDATE - 2022-02-19 - Added Drive gear with longer teeth (+3.2mm)

UPDATE - 2022-02-18 - Added a bigger Idle Wheel (In case you need more tension in the tracks) WARNING Use only if needed, 1 or 2 per frame is probably the maximum, otherwise I suspect the track will be too short.

UPDATE - 2022-02-07 - Narrow Version (UNTESTED) : https://www.thingiverse.com/thing:5237362
They might look more scale but they definitely wont perform as good in deep snow.

UPDATE - 2022-02-07 - Added Anti-Rotation (TRX-4). It is not tested. If you have a TRX-4, please keep me updated in the comments, I will make adjustements if needed !

UPDATE - 2022-02-04 : Added Track - 7 links (So you can print 6 + 7 links to make 13 if you prefer)

Credit where credit is due
My design is made from scratch with no copy-paste involved whatsoever, but it is heavily inspired by this one : https://cults3d.com/en/3d-model/various/snowboss-track-set-v3-0

MHST_V2_-_Anti-Rotation_Capra.stl 35.5KB
MHST_V2_-_Anti-Rotation_GateKeeper_FRONT.stl 26.4KB
MHST_V2_-_Anti-Rotation_GateKeeper_REAR.stl 27.4KB
MHST_V2_-_Anti-Rotation_TRX-4.stl 36.4KB
MHST_V2_-_Drive_Gear_12T.stl 92.1KB
MHST_V2_-_Frame_-_Front_Left.stl 173.8KB
MHST_V2_-_Frame_-_Front_Right.stl 173.8KB
MHST_V2_-_Frame_-_Rear_Left_LONG.stl 189.1KB
MHST_V2_-_Frame_-_Rear_Right_LONG.stl 189.1KB
MHST_V2_-_Frame_-_Rear_Symmetric.stl 187.1KB
MHST_V2_-_Hex_Shaft.stl 12.2KB
MHST_V2_-_Idle_Wheel.stl 85.6KB
MHST_V2_-_PLA_13_Paddles.stl 368.2KB
MHST_V2_-_PLA_1_Paddle.stl 28.4KB
MHST_V2_-_PLA_6_Paddles.stl 170.0KB
MHST_V2_-_Single_Link.stl 108.1KB
MHST_V2_-_Snow_Track_-_Straight_Cotter_Pin.stl 3.1KB
MHST_V2_-_Snow_Track_13_links.stl 1.8MB
MHST_V2_-_Snow_Track_6_links.stl 853.8KB
MHST_V2_-_Snow_Track_7_links.stl 1002.6KB
MHST_V2_-_U-Shape_Cotter_Pin.stl 14.7KB