RC (slash 2wd) ESC And Receiver Switch 3D Printer Model
The file 'RC (slash 2wd) ESC And Receiver Switch 3D Printer Model' is (stl) file type, size is 49.6KB.
The file 'RC (slash 2wd) ESC And Receiver Switch 3D Printer Model' is (stl) file type, size is 49.6KB.
Due to a the installation of a new RC motor and ESC, I felt the need to switch the ESC position with the ESC position. So I created a plate to mount te receiver with screw holes for the Hobbywing EZrun Max10SCT. Soif you have that one, you can screw it on, otherwise just use double sided tape.
The second part I made was a mount for the cables from the Motor to the ESC. I have 2 versions of this mount. One version with a little attachment for the Temp Sensor cable(print at 110%), and one without (print at 100%). This part has to be superglued to the shock tower.
Then the last itemwas the reciever plate, Which I wanted to fit, So i couldn't have it mounted to the plate with screws. So the reciever box has to be attached to the plate with double sided tape (or superglue)
If there's anything you want chenged, let me know.
| Cable_holder_RC_engine.stl | 52.2KB | |
| Cable_holder_RC_enginewith_temp_cable.stl | 66.8KB | |
| ESC_plate.stl | 423.2KB | |
| Receiver_plate.stl | 137.0KB |
