this is a scale trailer I made for my nqd jet boat. I used pla+. it has working leafsprings. I glued and bolted all pieces together and have not had anything break. Use m3 hardware. two different 12mm extensions mattering on the rim you choose. I chose a small 1.9 this way didn rub. you will also need wo 6700zz ball bearings and a length of 5mm ready rod. slide rod through extensions axles and wheels and cut to length.
| rcboatextensions.stl | 800.7KB | |
| rcboatfenders-fendersupport.stl | 1.2MB | |
| RCBOATfrontsupportR.stl | 287.8KB | |
| RCBOATHULLHOLDER.stl | 62.4KB | |
| rcboatsliders.stl | 406.4KB | |
| rcboattraileraxle.stl | 2.4MB | |
| rcboattrailerfront.stl | 641.1KB | |
| rcboattrailermiddle.stl | 1.1MB | |
| rcboattrailerrear.stl | 601.2KB |
