In addition to the 3D printed parts the following items are needed:
| 00_sailboat_Drawing_v1.pdf | 210.7KB | |
| 3_holes_bar_v2.stl | 72.5KB | |
| battery_box_v4.stl | 1.4KB | |
| battery_lid_v1.stl | 9.1KB | |
| casette_frame_v7.stl | 122.5KB | |
| casette_v26.stl | 260.4KB | |
| cleat_v2.stl | 116.8KB | |
| cura_profile_mini_boat_hull_test_1.curaprofile | 995.0B | |
| End_fitting_v5.stl | 297.2KB | |
| fitting2_large_v2.stl | 35.6KB | |
| fitting2_v1.stl | 38.8KB | |
| Gooseneck_v11.stl | 311.3KB | |
| Hull_1_v36.stl | 9.0MB | |
| Jib_attachement_v2.stl | 122.9KB | |
| Keel_bulkhead_v3.stl | 1.3MB | |
| Keel_support_v3.stl | 35.2KB | |
| Keel_v14.stl | 1.6MB | |
| knob_v1.stl | 784.1KB | |
| manhole_cover_v7.stl | 523.3KB | |
| manhole_frame_v4.stl | 131.7KB | |
| manhole_lock_v5.stl | 72.7KB | |
| mast_connector_v1.stl | 198.3KB | |
| retainer_v1.stl | 187.2KB | |
| Rigging.pdf | 128.9KB | |
| rudder_NACA-0009_v12.stl | 8.2MB | |
| rudder_v15.stl | 101.8KB | |
| sail_spreaders_v1.stl | 59.7KB | |
| servo_arm_v4.stl | 411.1KB | |
| spacer_v1.stl | 163.6KB | |
| tiller_v8.stl | 171.4KB |
