A small project i made in my free time
2mm rod 1200mm total
360 deg 90G servo and fastner screws
6v Nimh battery
Dual motor speed controler
you need to print 42 track links total each needing a 20 mm long pin
This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/bJ2TNorLsjd
| bJ2TNorLsjd.stl | 6.4MB | |
| Idler_wheel.stl | 154.3KB | |
| Lower_hull.stl | 250.4KB | |
| Return_roller.stl | 23.5KB | |
| Roadwheel.stl | 61.8KB | |
| Sprocket_wheel.stl | 143.8KB | |
| Tentioning_arm.stl | 33.9KB | |
| Tentioning_plunger.stl | 31.1KB | |
| Track_segment.stl | 105.6KB | |
| Turret.stl | 212.2KB | |
| Upper_hull.stl | 144.5KB |
