Use
-A2212-6T
-2x 12g servo
The thickness of the plane body: 2mm
Print The wings with: 5% fill
| A2212-6T_Motor_cover.stl | 212.6KB | |
| left_elevator.stl | 46.3KB | |
| left_end_wing.stl | 232.6KB | |
| Left_wing.stl | 250.7KB | |
| Left_wing_Cut_1.stl | 108.2KB | |
| Left_wing_Cut_2_Cut_1.stl | 96.8KB | |
| Left_wing_Cut_2_Cut_2.stl | 88.2KB | |
| PP_Body.stl | 5.6MB | |
| PP_Body_Cut_1_Cut_1.stl | 2.3MB | |
| PP_Body_Cut_1_Cut_2.stl | 1.1MB | |
| PP_Body_Cut_2.stl | 2.6MB | |
| right_elevator.stl | 46.3KB | |
| Right_end_wing.stl | 232.6KB | |
| Right_wing.stl | 251.0KB | |
| Right_wing_Cut_1_Cut_1.stl | 98.8KB | |
| Right_wing_Cut_1_Cut_2.stl | 101.8KB | |
| Right_wing_Cut_2.stl | 93.5KB | |
| Tail.stl | 74.2KB |
