RC Plane Landing Gear + Optional Skis + Tires 3D Printer Model
The file 'RC Plane Landing Gear + Optional Skis + Tires 3D Printer Model' is (STL) file type, size is 120.3KB.
The file 'RC Plane Landing Gear + Optional Skis + Tires 3D Printer Model' is (STL) file type, size is 120.3KB.
RC landing gear + optional ski for medium aircraft + gear. (1-2KG) maybe 3?
All holes of landing gear and ski are for M4 screws, but you can scale to 75% or 50% for M3 or M2 screws for little/lighter airplanes!
You need 3 screws for fix the leanding gear to the model and 2 screws for tires/ski.
The ski model is flat, and you must curve it with hot air gun or hairdryer after print!
The skis need two elastic for fix it to the top of the landing gear to a trasversal wire or samethings like that.
It's important that the print of landing gear is "lying down" and "not vertical": the strength will result much better. (image 3)
For skis you must set supports for correctly print elastic hook and mirror it for left and right.
Landing gear doesn't need particulary settings, but do it strong: 3 or more perimetral.
UPDATE: wheels for polystyrene tires uploaded
| carrello3.STL | 246.1KB | |
| ruota1.STL | 91.1KB | |
| sci1.STL | 73.1KB |
