PLEASE DOWNLOAD FROM ''THING FILES'' FOR THE LATEST VERSION
UPDATE(2019/6/20): Nose length has been shortened by 20% to balance the weight. Carnard canceled on this plane.
Wingspan: 930mm
Take off weight should be controlled around 970g
Wing area is around 0.17m^2
Airfoil is NACA-25112
Recommended setup:
40A ESC
2306 motor(2400kv)
5x4x3 prop
1300-1600mah 4s Lipo battery
Every single detail is designed for a purpose and is well concerned before sketching. My final goal is to make an efficient fpv platform made of 3D printed materials. Actually, this is a 75% scale version of my original design.
I am a college student studying aerospace engineering in the University of Illinois. I would be really appreciated if you can support me a little bit. Just some tips will make me really happy :)
This project is still in progress. I don't have much time to go to test this beauty since the final is approaching. Thus, I decided to share this project with you guys earlier. Please share the CG location if you successfully make it fly.
Important:
This plane does not have build in structures. The infill structure is recommended to use Fast Honeycomb in Simplify 3D. The infill should not larger than 2%
| alironL_1.stl | 11.9KB | |
| alironL_2.stl | 13.2KB | |
| alironR_1.stl | 12.1KB | |
| alironR_2.stl | 13.1KB | |
| body_1.stl | 4.3MB | |
| body_2.stl | 3.2MB | |
| body_3.stl | 2.3MB | |
| body_4.stl | 5.1MB | |
| cano_1.stl | 12.2KB | |
| cano_2.stl | 11.0KB | |
| cano_3.stl | 11.8KB | |
| Dart-2.zip | 31.4MB | |
| link.stl | 15.1KB | |
| motor.stl | 222.2KB | |
| rodL.stl | 80.3KB | |
| rodR.stl | 80.2KB | |
| stabL.stl | 79.6KB | |
| stabR.stl | 77.2KB | |
| stab_fin1.stl | 5.4KB | |
| stab_fin2.stl | 5.9KB | |
| wingL_1.stl | 186.4KB | |
| wingL_2.stl | 92.6KB | |
| wingR_1.stl | 165.7KB | |
| wingR_2.stl | 101.6KB | |
| wingtipL.stl | 1.3MB | |
| wingtipR.stl | 1.3MB |
