RC Model Control Horns 3D Printer Model
The file 'RC Model Control Horns 3D Printer Model' is (scad,stl) file type, size is 26.2KB.
The file 'RC Model Control Horns 3D Printer Model' is (scad,stl) file type, size is 26.2KB.
Various control horns for model Aeroplanes. They are fully parametrised but without error checking.
| Parameter | Default Value | Description |
|---|---|---|
| hornBL | 36 | Length of the control surface |
| hornH | 12.5 | OA height of horn |
| hornO | 5 | Connection offset |
| holeN | 1 | Number of holes |
| holeDia | 0.8 | hole dia |
| holeTop | 9 | distance from bottom of horn to top hole |
| holeBottom | 9 | distance from bottom of horn to bottom hole |
| controlT | 0 | Control surface thickness |
| plateHoles | 1.8 | fixing holes |
| Module | Description |
|---|---|
| LH_Horn(); | Fixing plate on left hand side |
| RH_Horn(); | Fixing plate on right hand side |
| Horn(); | Draw Horn |
| Fix_Plate(); | Adds a flat with screw holes to the horn |
| Horn_X(); | A flat plate with screw holes cut to allow the horn to be inserted |
| Rt_Plate(); | angle plate use two to sandwich the control horn |
3D printed version of the Flite Test Mini control horn.
| Parameter | Default Value | Description |
|---|---|---|
| plateX | 21.5 | Length of horn |
| plateY | 18 | Height of horn |
| plateThck | 2; | Plate thickness. Plywood ones are 1.5mm |
| push_hole_r | 0.5; | Mark the hole centre drill it out to correct size |
| Module | Description |
|---|---|
| Control_Horn | Draw the control horn |
These parts need to be strong. Print with 3 or 4 shells and 50% or greater fill.
| Control_Horns.scad | 4.7KB | |
| Control_Horns_LH.stl | 47.0KB | |
| Control_Horns_RH.stl | 50.2KB | |
| Flinky_Aileron_Control_Horns.stl | 46.3KB | |
| Flinky_Aileron_RH_Control_Horns.stl | 50.7KB | |
| Flite_Test_Mini_Control_Horn.stl | 54.0KB | |
| Flite_Test_Mini_Control_Horn_mod.scad | 1.6KB | |
| Flite_Test_Mini_Control_Horn_mod.stl | 54.5KB |
