RC Joystick With Trim 3D Printer Model
The file 'RC Joystick With Trim 3D Printer Model' is (stl) file type, size is 2.7MB.
The file 'RC Joystick With Trim 3D Printer Model' is (stl) file type, size is 2.7MB.
Joystick with mechanical trim feature that you can use with remote control circuits.
Filament: PLA (Can be printed with Normal/Standard slicer settings.)
My Youtube Channel: https://www.youtube.com/@Kendin-Yap
| GIMBAL_PART_U1.stl | 129.2KB | |
| GIMBAL_PART_U1_PIN_3.9mm.stl | 28.2KB | |
| GIMBAL_PART_U2.stl | 86.2KB | |
| GIMBAL_PART_U3.stl | 117.7KB | |
| GIMBAL_PART_U3_PIN_3.15mm.stl | 28.2KB | |
| HOLDER_PART.stl | 3.0KB | |
| MAIN_BOARD_LEFT.stl | 427.5KB | |
| MAIN_BOARD_RIGHT.stl | 427.1KB | |
| MAIN_BOARD_TOP_CIRCLE.stl | 1.5MB | |
| MID_GIMBAL.stl | 298.9KB | |
| MID_GIMBAL_PART_1.stl | 72.5KB | |
| MID_GIMBAL_PART_2.stl | 377.5KB | |
| POT_HOLDER.stl | 82.7KB | |
| POT_HOLDER_PIN_3mm.stl | 28.5KB | |
| POT_NUT.stl | 2.6MB | |
| SIDE_PART_1.stl | 508.0KB | |
| SIDE_PART_2.stl | 536.1KB | |
| SPRING_HOLDER.stl | 45.4KB | |
| SPRING_ROD.stl | 67.9KB | |
| STICK.stl | 95.0KB | |
| STICK_PART.stl | 195.0KB | |
| STICK_PART_PIN_5.25_mm.stl | 56.3KB | |
| THROTTLE_STICK_PART.stl | 30.4KB | |
| TRIM_PART.stl | 257.8KB | |
| TRIM_PIN_4mm.stl | 28.2KB |
