--- Edit 21/06/19: Updated built for 35 serie outruner; https://www.thingiverse.com/thing:3682557 ---
Brushless outrunner mod kit for for OSSUM Jeep with 3D Anarchy drive train thing 2596295:
https://www.thingiverse.com/thing:2596295
Has belt drive with 12 to 52 ratio gear.
Required belt: S3M-186 such as this: http://m.3racing.hk/products.php?products_key=7384
2830 outrunner with 1000KV working on 2 x 18630 batteries.
Included is a transmission mount and gear selector plate for servo controlling the gear box designed by 3D Anarchy.
The gears are locked with a M3 nut. Hand drill at 2.4mm and M3 tap before installing.
Included is a steering servo mount for Hitec 225MG servo that fit the engine bay.
Thanks to 3DAnarchy for his super design and two speed solid gearbox!!!
UPDATE 03/11/18: Servo control rod file added, manual selector rod kept.
UPDATE 05/11/18 belt reference and link corrected!
UPDATE 18/10/20: added the roll bar cross member as per Denior request.
| 12t_motor_pulley.stl | 472.6KB | |
| 52_teeth_wheel.stl | 646.3KB | |
| bedzengine_mount.stl | 615.4KB | |
| bedzspacers.stl | 56.3KB | |
| D0112_Manual_Selector_Rod.stl | 10.7KB | |
| D0112_Servo_Control_Flange.stl | 96.8KB | |
| D0112_Servo_Control_WIP.stl | 107.4KB | |
| D0112_Servo_Link_Rod_Bedplane_Part.stl | 184.2KB | |
| F0110_Transmission_Mount_Right_for_servo_gear_link.stl | 446.8KB | |
| Roll_bar.stl | 2.1MB | |
| Servo_mount._for_Hitec_Mighty_Mini.stl | 54.8KB |
