RC Jeep JK Back Brace Lipo Mount 3D Printer Model
The file 'RC Jeep JK Back Brace Lipo Mount 3D Printer Model' is (stl) file type, size is 123.5KB.
The file 'RC Jeep JK Back Brace Lipo Mount 3D Printer Model' is (stl) file type, size is 123.5KB.
Update 2018-05-07:
Changed the mount so that you now can also use it with 3S Lipos of 70mm long, 33mm wide and 25 / 23 mm high. Also made a second bridge so that it is easy to swap between the two Lipo types.
This is a simlpe battery mount for a 2S Lipo 34mm wide, 14mm high an 104mm long.
It only needs to Clips to make the Lipo stay in place.
It works together with my chassis for the Hong Kong Jeep JK (275mm Wheelbase) https://www.thingiverse.com/thing:2737503
| Bridge_2S_Lipo_L_x_34_x_14.stl | 61.0KB | |
| Bridge_2S_Lipo_L_x_34_x_14_higher.stl | 20.4KB | |
| Bridge_3S_Lipo_70x33x23_higher.stl | 28.4KB | |
| Bridge_3S_Lipo_70x33x25_higher.stl | 28.8KB | |
| JK_Final_Back_Brace_2S_Lipo_mount.stl | 255.3KB | |
| JK_Final_Back_Brace_2_3S_Lipo_Mount_higher.stl | 129.0KB |
