I designed this car to run on a simple rotary servo motor, and to reach 30km/h.
Gearbox allowing the wheels to go from 55 RPM to 2358 RPM to reach the desired 30km/h.
The internal mechanics are impressive to see working and the design of the sleek but stylized chassis attracts attention.
The drawing of the electronic board is provided in the parts, and the code will be available shortly if there is interest.
Non print list parts:
| Black-AxleBackLeft.stl | 88.7KB | |
| Black-AxleBackRight.stl | 239.3KB | |
| Black-AxleBearingHolder-2X.stl | 57.7KB | |
| Black-CircuitHolder.stl | 237.7KB | |
| Black-GearHolderBloc.stl | 76.7KB | |
| Black-RimBack-2X.stl | 2.1MB | |
| Black-RimFront-2X.stl | 2.1MB | |
| Black-SteeringBottom.stl | 121.6KB | |
| Black-SteeringGuide.stl | 353.8KB | |
| Black-SteeringJoin-2X.stl | 50.3KB | |
| Black-SteeringTire-2X.stl | 256.3KB | |
| Black-SteeringTop.stl | 72.7KB | |
| Black-SwitchsHolder.stl | 93.4KB | |
| Black-Tires-4X.stl | 1.9MB | |
| Blue-AxleHolder.stl | 100.5KB | |
| Blue-FrameBack.stl | 332.9KB | |
| Blue-FrameFront.stl | 494.5KB | |
| Blue-GearBoxBloc.stl | 198.8KB | |
| Gerber_FastCarRC_PCB_V2.zip | 74.1KB | |
| Green-GearBoxA.stl | 851.1KB | |
| Green-GearBoxB.stl | 1.4MB | |
| Green-GearBoxC.stl | 1.2MB | |
| Green-GearBoxD.stl | 606.8KB | |
| Green-GearBoxE.stl | 346.5KB | |
| Green-GearBoxF-2X.stl | 449.4KB | |
| Green-GearBoxG.stl | 382.4KB | |
| Purple-GearHolderA.stl | 147.6KB | |
| Purple-GearHolderB.stl | 467.1KB | |
| Purple-GearHolderC.stl | 248.7KB | |
| Red-BodyA.stl | 218.3KB | |
| Red-BodyB.stl | 561.4KB | |
| Red-BodyC.stl | 838.8KB | |
| Red-BodyD.stl | 264.9KB | |
| Yellow-WheelCover-4X.stl | 2.2MB |
