RC Boat Trim Plate 3D Printer Model
The file 'RC Boat Trim Plate 3D Printer Model' is (stl) file type, size is 34.1KB.
The file 'RC Boat Trim Plate 3D Printer Model' is (stl) file type, size is 34.1KB.
This is a forgotten project.
Many years ago i got 2 toy grade rc boats, the kind that steers by stopping the inside motor, they did work but i needed some more speed so i removed the stock rc gear and put some hobby grade stuff in them(brushed esc and 2s lipo batt,2,4 ghz radio) and made a rudder.
When i tested them ,they were fast but too light in the nose(no trim) so i moved the batt forward to help get the nose down but a lipo batt is not that heavy so it only helped a little.
When i got home i designed these. They work very well but now i need some bigger/faster motors, stock 380 is not enough.
And here we come to the forgotten part, that was 3 years ago and i left the boat on the shelve not to be used again. I found the files on my computer and took a look at the boat again, the files for the rudder/servo mount is lost so i am uploading the trim plates if some one can use them, the boat is 700mm long if that is any help.
| Trimboat.stl | 101.3KB | |
| Trimplate.stl | 60.4KB |
