RC Boat 3D Printer Model
The file 'RC Boat 3D Printer Model' is (stl,STL) file type, size is 10.2MB.
The file 'RC Boat 3D Printer Model' is (stl,STL) file type, size is 10.2MB.
CAD model: https://grabcad.com/library/rc-boat-7
prop and shaft (007):
Battary li-po 3s
ESC (90A):
motor 3650 (4300Kv):
Servo MG995:
print settings:
Nozzle: 0.8mm
Extrusion Width 0.92...0.93
Layer Hight: 0.4
Perimeter Shells: 2
Inflll: 40...70%
Inflll Extrusion Width 80...90%
| 001.stl | 1.3MB | |
| 002.stl | 1.2MB | |
| 003.stl | 2.5MB | |
| 004.stl | 4.1MB | |
| 005.stl | 4.1MB | |
| battary_holder.stl | 64.4KB | |
| Fin.stl | 152.3KB | |
| hull.STL | 12.8MB | |
| kabin.STL | 4.9MB | |
| kabina001.stl | 1.3MB | |
| kabina002.stl | 1.3MB | |
| kabina003.stl | 703.5KB | |
| motor_frame.stl | 416.8KB | |
| Part1.stl | 2.7MB | |
| Part2.stl | 257.5KB | |
| Part3.stl | 723.9KB | |
| Part4.stl | 651.5KB | |
| rudder02.stl | 1.1MB | |
| servo_holder.stl | 159.3KB |
