This is our motorized version of the vintage Göppingen Gö 1 Wolf.
Instructions are available on our site: https://www.eclipson-airplanes.com/g%C3%B61wolf
If you download the files from our page you get also the G-codes.
Join our Facebook group community to share your Wolf, or to ask in case of doubt during the printing/assembly processs.
https://www.facebook.com/groups/146642260886244
| Aileron1L.stl | 68.7KB | |
| Aileron1R.stl | 68.7KB | |
| Aileron2L.stl | 78.7KB | |
| Aileron2R.stl | 78.7KB | |
| Aileron3L.stl | 211.1KB | |
| Aileron3R.stl | 211.1KB | |
| Canopy.stl | 904.6KB | |
| Elev1L.stl | 289.0KB | |
| Elev1R.stl | 336.4KB | |
| Elev2L.stl | 119.4KB | |
| Elev2R.stl | 119.4KB | |
| Elevator_fitting.stl | 78.0KB | |
| Fus1.stl | 1.6MB | |
| Fus2.stl | 981.0KB | |
| Fus3.stl | 530.8KB | |
| Fus4.stl | 527.1KB | |
| Graphics1.stl | 490.9KB | |
| Graphics2.stl | 870.8KB | |
| Hinge.stl | 1.4KB | |
| HTP1L.stl | 313.3KB | |
| HTP1R.stl | 313.3KB | |
| LG_root.stl | 425.8KB | |
| Lock_1.stl | 99.6KB | |
| Lock_2.stl | 117.6KB | |
| Motor_holder.stl | 450.5KB | |
| Pillow.stl | 227.5KB | |
| Pilot.stl | 9.8MB | |
| Pin_canopy.stl | 884.0B | |
| RimD40.stl | 122.4KB | |
| Servo_holder_fus.stl | 31.5KB | |
| Servo_holder_Wing.stl | 217.8KB | |
| Skid.stl | 39.0KB | |
| Spinner1.stl | 398.9KB | |
| Spinner2.stl | 394.4KB | |
| Strut_L.stl | 26.3KB | |
| Strut_R.stl | 26.3KB | |
| TyreD40.stl | 692.1KB | |
| VTP.stl | 916.6KB | |
| Window_fitting.stl | 9.1KB | |
| Window_pattern.stl | 19.4KB | |
| Wing1L.stl | 509.2KB | |
| Wing1R.stl | 494.7KB | |
| Wing2L.stl | 658.5KB | |
| Wing2R.stl | 658.5KB | |
| Wing3L.stl | 607.5KB | |
| Wing3R.stl | 607.5KB | |
| Wing_C.stl | 393.1KB |
