RC Airplane Floats For QTrainer 3D Printer Model
The file 'RC Airplane Floats For QTrainer 3D Printer Model' is (STL) file type, size is 2.1MB.
The file 'RC Airplane Floats For QTrainer 3D Printer Model' is (STL) file type, size is 2.1MB.
[WARNING!!! I HAVEN'T TESTED THESE FLOATS IN THE AIR YET! I plan to do this soon. They do float and are waterproof if you follow my advice below.]
Floats/Pontoons for 3DLabPrint's QTrainer airplane. Could also be used for other RC Airplanes as well or even a pontoon boat; the world is your oyster :)
My goal was to make everything so that it could easily be added onto the plane without removing too much, only the wheels themselves need to be removed.
For splicing, you will need to rotate each part accordingly. This is due to how I modeled them and I’m too lazy to change it.
| Back_Mount_L.STL | 53.3KB | |
| Back_Mount_R.STL | 53.4KB | |
| Float_Back_v2.3.STL | 2.4MB | |
| Float_Front_v2.3.STL | 669.7KB | |
| Float_Mount_Support.STL | 368.4KB | |
| Float_Rudder_Dual_Horn.STL | 134.7KB | |
| Float_Rudder_Left_Horn.STL | 126.5KB | |
| Float_Rudder_Right_Horn.STL | 128.2KB | |
| Front_Mount_L.STL | 53.4KB | |
| Front_Mount_R.STL | 53.4KB | |
| Rudder_Linkage_Arm.STL | 13.2KB | |
| Rudder_Mount_Dual_Control.STL | 392.9KB | |
| Rudder_Mount_Left_Control.STL | 378.2KB | |
| Rudder_Mount_Right_Control.STL | 378.2KB | |
| Tail_Wheel_Linkage_Adapter.STL | 108.0KB |
