These spacers were created to use with the RocHobby Atlas 4x4 RC 1/10th scale truck to modify the pan-hard bar mounting position as well as the steering linkage so that it does not bind when flexing the suspension after adding larger shocks. These spacers setup as shown in my picture allow for the stock servo to turn the wheels properly with no binding. I am running 80mm shocks but could very easily upgrade to larger shocks with this setup.
| Atlas4x4_SuspensionUpgrade_15mmSpacer.stl | 117.6KB | |
| Atlas4x4_SuspensionUpgrade_30mmSpacer.stl | 98.5KB | |
| Atlas4x4_SuspensionUpgrade_7.5mmSpacer.stl | 99.5KB |
