The original project is a great engineering work. So, why I made this remix?
- The original project has no hardware and can't withstand high speed 😩
- The Cult project that Mathieu Houle was inspired with has hardware but it's paid and too complicated to build 😠
This remix uses hardware and simple to assemble. For assembly you will need:
- 683ZZ 3x7x3mm bearings - 28 pieces
- [6703RS 17x23x4mm bearing]4] - 8 pieces
- M3 x 16mm screws - 12 pieces (to install ati-rotation details)
- M3 melted nuts 3.0x4.6x4.5 or 3.0х4.5х4.5 - 14 pieces
- M3 x 40 mm screws - 14 pieces
- M3 narrow washers - 28 pieces
Printing
- Frames
- 100% infill. PETG, ABS
- Supports required
- Main wheel
- 100% infill. PETG, ABS
- Supports required
- Rollers
- 10-15% infill. PETG, ABS
- Supports required
- Tracks from the original project
- 95% infill (to make them more flexible). PETG
- For the front tracks you will need 26 links. Better to print: 7 + 7 + 6 + 6
- For the rear tracks - 32 links. Better to print: 7 + 7 + 6 + 6 + 6
- TPU Paddles
- 100% infill. Recomend to print the model with hard FLEX material (with hardness 60D)
- 116 paddles for 4 tracks needed 😅
Postprinting
- Main wheel and Frames
- Bearings must be installed with interference! Use hammer or gripe.
- Tracks
- It's better to connect track parts with TPU filament by melting the ends with a soldering iron or do it like this
- Paddles
- Use pliers to install paddles into tracks
Anti-rotation adapters (find yours in remixes)
- ZD Racing DBX 10 / Absima ADB 1.4 ✅ Checked
- Remo Hobby SMAX 1/10 ✅ Checked
- TRAXXAS TRX-4 ⚠️ Needs testing
- RTR GateKeeper ⚠️ Needs testing
- Tamiya DT-03 Neo Fighter ⚠️ Needs testing
- Axial Capra ⚠️ Needs testing
- Axial SCX10 Deadbolt, comming soon...
Nut tool
Answering basic questions
- It should fit any car with a standard 12mm Hex wheel mount;
- Only 1/10 RC models supported;
- Patency depends on:
- RC weight,
- axles locking,
- snow density.
History
21.11.2024
- Add STEP files in 7-zip archive
- Oposite frame parts was rotated in wrong direcrion. Fixed! Thanks to @ionof 👍
- STL models has been rotated to the right printing orientation (version of STL files changed 2.1 -> 2.2):
- Front frame oposite
- Back frame oposite
20.07.2024
- Main descriptionchanged: "... m3x16 instead of m3x6 for the anti-rotation screw". Thanks to @DookieRacer 👍
26.01.2024
- Anti-rotation adapter thickness changed (6mm -> 9.4mm).
- STL models has been rotated to the right printing orientation (version of STL files changed 2.0 -> 2.1):
- Main wheel
- Front frame oposite
- Back frame oposite
12.01.2024
11.01.2024
- Reduce mounting diameter for 6703RS bearing in main wheel. 23.4 mm -> 23.1 mm.
- Reduce mounting diameter for 683ZZ bearing in roller. 7.3 mm -> 7.1 mm
- Main descriptionchanged: "6703RS bearing supposed to be 17x23x4mm". Thanks to @slider162 👍
09.01.2024
- Update front frame parts. front oposite frame was not uploded. Sorry ((
05.01.2024
31.12.2023
- Happy New Year, everyone! It's first upload 🎄
Let it snow!!! ❄️
