RBA – House 9 3D Printer Model
The file 'RBA – House 9 3D Printer Model' is (stl) file type, size is 228.2KB.
The file 'RBA – House 9 3D Printer Model' is (stl) file type, size is 228.2KB.
A 1:100 scale concept model for a house in Western Australia on a moderately sloped site on the coast. The project was modeled in Archicad, where it was broken into small enough parts to fit the build plate. This also allows for the client to take apart the model and get a better idea of the spaces. The parts were printed on the 5th Generation Makerbot Replicator.
There was minimal post production work required, with the addition of the lighting and battery back factored into the design before printing. A removable wall, located on the upper floor, can be replaced with one containing a void that allows for better light transmission.
| RBA_House_9_Basement1of2_fixed.stl | 70.0KB | |
| RBA_House_9_Basement2of2_fixed.stl | 114.0KB | |
| RBA_House_9_Ground_Floor_1of2_fixed.stl | 81.5KB | |
| RBA_House_9_Ground_Floor_2of2_fixed.stl | 156.2KB | |
| RBA_House_9_Lift_Shaft_LED_Stand_fixed.stl | 151.3KB | |
| RBA_House_9_Misc_Parts_1of1_fixed.stl | 173.4KB | |
| RBA_House_9_Roof_1of1_fixed.stl | 65.3KB | |
| RBA_House_9_Site_1of4_fixed.stl | 43.6KB | |
| RBA_House_9_Site_2of4_fixed.stl | 30.1KB | |
| RBA_House_9_Site_3of4_fixed.stl | 51.5KB | |
| RBA_House_9_Site_4of4_fixed.stl | 43.0KB | |
| RBA_House_9_Upper_Floor1of1_fixed.stl | 71.2KB |
