Razor + Shaving Brush + Toothbrush Holder 3D Printer Model
The file 'Razor + Shaving Brush + Toothbrush Holder 3D Printer Model' is (stl) file type, size is 419.8KB.
The file 'Razor + Shaving Brush + Toothbrush Holder 3D Printer Model' is (stl) file type, size is 419.8KB.
Summary:
I created this model to help free up counter space next to my sink.
I created this stand in 3 pieces to aid in printing and to allow for easy cleaning when necessary. Since the print will also undoubtedly get wet, I have also added the honeycomb pattern to the body to allow for easy drying.
If the overhangs of the body are too much for your printer, I have also created a version in which the body can be printed in two parts (find the "2 Part Body" STL's in the files)
Printing:
(Please ignore the rough print quality in my photo. I am currently dealing with a cracked extruder arm)
Infill: 20% (you could probably reduce this if you increased the walls)
Layer height: 0.2mm
Print orientation: See the attached screenshot from my slicer. I found it best to print the top piece on its side, the base with its flat side down, and the body as it would normally stand. If you are using the two-piece body model, print the flat faces on the build plate.
Please consider buying me a coffee if you liked it or helped you :) https://www.buymeacoffee.com/DastardlyDoge
| 2_Part_Body_pt_1_of_2.stl | 220.5KB | |
| 2_Part_Body_pt_2_of_2.stl | 221.3KB | |
| Base.stl | 151.4KB | |
| Single_part_Body_.stl | 441.3KB | |
| Top.stl | 896.1KB |
