Update 7/1/20: Want more detail? See the updated version here: https://www.thingiverse.com/thing:4515681
Model is from Pocket Camp, ripped by Centrixe (thank you!). I posed him, added a base and optimized for printing. He prints in three pieces that you glue together at the end.
Printing settings: I’d recommend both a brim and supports. I print at 0.12 mm resolution.
For glueing I use Loctite super glue. Line up and glue the base first, then the head once that’s dry. That lets you correct for any warping.
If you would like to paint, sand and spray with a primer first then paint with acrylic craft paint. I use the cheap kind from walmart and it works fine, just make sure to thin it with water first.
After painting I spray mine with Krylon Colormaxx Clear - Flat to protect the paint.
More details on how I process and paint my prints here: https://craftsauce.blogspot.com/2021/02/animal-crossing-figures-3d-prints-my.html
| raymond_full.stl | 14.9MB | |
| raymond_full_-_bigger_base.stl | 14.9MB | |
| raymond_full_decimated.stl | 3.4MB | |
| raymond_split.stl | 15.4MB | |
| raymond_split_-_bigger_base.stl | 15.4MB |
